Geekvape Frenzy Pod Mod Electronic Cigarette
The Geekvape Frenzy Pod Kit is elegantly designed with options for both carbon fiber and resin finishes. Powered by a built-in 950 mAh battery, the battery section features the AS chipset, which provides precise temperature control in TC heating mode. The chipset also has an automatic output matching function. This means that when the 0.7ohm coil is in use, the output will be set to power mode, which can be adjusted to 2.5V, 2.7V, or 2.9V. When the 1.2ohm coil is installed, the output will automatically switch to temperature control mode. As for the 2ml pods of the Geekvape Frenzy Pod Kit, they are attached to the mod section via a magnetic connection. Changing the coil in each pod is done with a screw-less cap that only requires a quarter turn to remove the coil. This cap also allows for airflow control adjustment. Moreover, refilling the pod is effortless due to a bottom cap that reveals a filling slot when removed. With your purchase, you will receive a 0.7ohm NS mesh coil pre-installed in the pod, and a 1.2ohm NS coil, which is said to provide maximum flavor production.
Geekvape Frenzy Pod Kit colors may vary depending on the production line.
The battery life of the Geekvape Frenzy Pod Kit is monitored with a side LED light. Pressing the fire button twice will illuminate the light in different colors to indicate battery level: green for higher than 70%, blue for 31-69%, and red for 30% or lower. During charging, the LED will flash the color corresponding to the current charge level: red for 0-69%, green for 70-100%, and the green light will stay on when the battery is fully charged. The Geekvape Frenzy Pod Kit can be charged using devices with a 5 Volt 1 Ampere output (e.g., computer, power bank, TV). The average charging time is 45 minutes.
Charging is recommended from devices with a 5 Volt 1 Ampere output, such as computers and power banks, using a USB cable.
