Joyetech eGo Aio Product Review (Ego Aio Series)
All Electronic Cigarette Models Are Here. Click the link to see our model varieties.
The Joyetech Ego Aio series appears as a simple and useful product that you will not encounter problems like liquid leakage.
The Joyetech Ego Aio All-In-One Style is a highly successful product as an easy-to-use electronic cigarette for both mouth-to-lung and direct-to-lung vaping, with everything integrated.
The package content includes the Ego Aio kit - 2 x 0.6ohm coils - USB cable - spare drip tip - user manual and warning card.
The Joyetech eGo Aio has a built-in 1500mAh battery, suitable for mouth-to-lung vaping for daily use. We can charge our electronic cigarette with its included cable from 1A output devices such as computers or power banks.
The 0.6ohm BF series SS316ohm coil included in the package is for mouth-to-lung vaping. Those who prefer large vapor production or direct-to-lung vaping will get better performance with a 0.5ohm coil.
The Joyetech ego aio is as easy to use as other pen-style screenless devices. The device turns on/off by pressing the firing button 5 times within 2 seconds.
To completely saturate the coil with liquid, you can fill a very small amount of liquid into the inner part of the coil before installing it, then fill with liquid and wait for about 15 minutes.
Changing Light Color: When the power is off, long press the fire button until the indicator light comes on, then press the button to cycle between red, yellow, green, blue, indigo, white, purple, or no light color.
The Joyetech Ego Aio is quite simple in structure; the coil is installed in the atomizer base, and after filling with liquid, it's ready to use. Cleaning the atomizer part is very simple; the parts can be separated and cleaned with a cloth or tissue.
You can adjust the vapor performance with the airflow control channel located in the Atomizer Base.
For 0.5ohm direct-to-lung (DTL) vaping, it is recommended to have the airflow channel fully open. For mouth-to-lung (MTL) vaping, it can be slightly closed, although this may vary for each user.
In Joyetech Ego Aio, Joyetech Ego Aio d22, and Joyetech Ego Aio d22 XL models, the glass is fixed and pressed in, making glass replacement very difficult. I recommend using it with a vape band.
The Joyetech Ego series light notification also serves as a charge indicator.
If the battery level is between 60% and 100%, the light will stay on solid when firing.
If the battery level is between 30% and 59%, the light will flash slowly when firing.
If the battery level is between 10% and 29%, the light will flash at a medium speed when firing.
If the battery level is between 0% and 9%, the light will flash quickly when firing.
Perhaps this is the electronic cigarette that years cannot wear out...
To purchase the Joyetech eGo Aio Kit Electronic Cigarette product at an affordable price, you can click on the product link below.
Eleaf iJust S 3000 mAh Product Review Setup and Usage
The Eleaf iJust S electronic cigarette package includes 3 Eleaf EC Coils. The pre-installed coil is 0.3 ohm, and the spare coils are 0.5 ohm and 0.18 ohm. The package also includes a USB cable, user manual, and an airflow control ring. Unlike many electronic cigarettes where the airflow channel is adjustable on the device, in the Eleaf iJust S model, it can be adjusted with the airflow control ring. To turn the device on/off, simply insert the battery and press the fire button 5 times. This action should be performed in a short time, like 1-2 seconds. Make sure the coil is wet when firing; if you fire with a dry coil, the cotton will burn.
The 3000mAh battery of the Eleaf iJust S electronic cigarette is sufficient for daily use. If you are a heavy user, it charges quite easily with a computer or power bank during the day. The charging time for an empty battery is approximately 3.5 hours. Liquid filling is very easy; the top part of the atomizer, called the top cap, is opened by twisting, and liquid can be filled through the wide channels on the side. The middle part is for airflow; be careful not to get liquid into this part. If you fill liquid through this part, it will directly pass through the inside of the coil and leak out from the airflow channel.
The atomizer structure of the Eleaf iJust S electronic cigarette resembles the Melo 3 mini, but it is larger in size with a liquid capacity of 4ml. Disassembling the parts for atomizer cleaning is quite simple. The atomizer opens by twisting and holding the base and top cap. The drip tip and glass can be removed by pulling; it is not a threaded system. For each new coil, it will be very beneficial for coil health to moisten the cotton parts visible on the side of the coil with 1-2 drops of liquid.
The Eleaf iJust S electronic cigarette is easy to use, and the light on the button also serves as a battery indicator. If the battery level is between 60% and 100%, the light will stay on solid during firing. If it's between 30% and 59%, the light will flash slowly. If it's between 10% and 29%, it will flash quickly. If the battery is between 0% and 9%, the light will flash very rapidly; you must charge it in this situation.
In the Eleaf iJust S electronic cigarette, if the fire button is held down for too long, the firing protection will activate. If held for 15 seconds, the light will flash 10 times and firing will be disabled.
If the fire button is pressed without an atomizer connected, the light will flash slowly and there will be no output.
If the coil is faulty or a coil lower than 0.15ohm is installed, the light will flash 3 times; the coil needs to be checked or replaced.
If the low voltage protection causes the battery output voltage to drop below 3.3V, the light will flash 40 times; in this case, you need to charge it.
These protection factors observed in the Eleaf iStick Pico electronic cigarette are not device malfunctions but protection functions.
The coils that come with the Eleaf iStick Pico Melo have a Kanthal wire structure and are used in VW / Watt mode; an average of 35W is sufficient. For each new coil use, the recommended method for moistening the coil cotton is to drip 1-2 drops of liquid onto the round parts visible on the side of the coil, then install the coil, fill with liquid, and wait for 15 minutes. The recommended wattage for the first firing is a low value like 20W; the wattage is increased after a few puffs. With this method, your coil will have a longer lifespan.
Smok AL85 Product Review
The Smok AL85 box content includes the AL85 Mod - TFV8 Baby Atomizer - V8 Baby Q2 0.4ohm Coil (pre-installed in the atomizer) - V8 Baby Q2 0.6ohm Coil (Spare) - USB Cable - Spare Gaskets and Vape Band - and user manuals.
The Smok AL85 Kit is a small electronic cigarette, a marvel of technology that can transport you from the earthly environment into outer space. With the same menu as the Smok Alien, which users call a space machine, the electronic cigarette experience is enhanced manifold. The long firing button on the left side of the device provides ease of use. The Smok AL85 is a device that will greatly satisfy those who want to quit smoking, especially with its superior performance and high vapor power.
Visually, the Smok AL85 has an aesthetic design. Its OLED screen located above the rectangular adjustment buttons facilitates navigation between menus. It offers various vaping pleasures with its wide range of mode options. In all models, firing occurs instantly, improving the vaping quality. Menu navigation is very easy and understandable.
As with other products, the package content does not include a battery; the battery selection is left to the user. The device works with 1 x 18650 type battery, and a minimum of 25 Ampere battery is recommended. With a Sony VTC6 battery, it can provide 1 day of use on a full charge.
The pre-installed Q2 Coil is 0.4ohm with a single winding, and its vapor performance is quite good. The spare Q2 0.6ohm coil has slightly lower vapor performance but much better flavor performance.
