GeekVape Aegis Boost Plus Pod Mod E-Cigarette Review

Geekvape Aegis Boost Plus Review

GeekVape Aegis Boost Plus Pod Mod E-Cigarette Review

What Can We Expect from the GeekVape Aegis Boost Plus?

The Geekvape Aegis Boost Plus is an Aegis device, so it's shock, dust, and water-resistant.

It's slightly larger than the original, and the display has been upgraded, even capable of color changes, though it remains quite standard.

Although the maximum wattage remains at 40W, there's a significant power difference. The original had an integrated 1500mAh internal battery, but the GeekVape Aegis Boost Plus uses an external 18650, which can go up to 3,500 mAh.

Other than what's mentioned above, they all look quite similar.


Let's take aGeekVape Aegis Boost Plus Pod Mod E-Cigarette Review look.

In the Box

GeekVape Boost Plus Mod

Boost Plus Pod

0.4ohm KA1 Mesh Coil

0.6 Ohm KA1 (Mesh) Coil

Extra Drip Tip

USB Cable

User Manual

Sample-box-contents-geekvape-aegis-boost-plus

Geekvape Aegis Boost Plus Features

Modes: VW, TC, Bypass

Airflow: Fully Adjustable AFC Ring

Push-Pull Coils

Water, dust, and shock resistant

Fast firing - <0.02s

Overheat protection

Overtime Protection (10s)

Short circuit protection

Geekvape Aegis Boost Plus Technical Specifications

Kit Size: 114.2 x 49.5 x 28.6 mm

Pod Capacity: 5.5ml (2ml TPD)

Display: 0.96” TFT Color Screen

TC: 100 - 315C / 200-600F

Battery: Single 18650 (external)

Temperature range: 100-315°C / 200-600°F

Resistance range: 0.1-3ohm

Material: Plastic, silicone, Leather, Zinc

Dustproof, waterproof and shockproof

Micro USB

Design and Build Quality

Geekvape Aegis Boost Plus Mod

From the side, it almost looks like a standard Aegis Mod.

That being said, I recently reviewed the Geekvape Aegis Max, and the mod has almost identical functionality, so perhaps it's a standard Aegis mod without the 510 connector.

Like other Aegis devices, the frame can be swapped with other Aegis Boost Plus frames by removing the T6 Torx Screws.

It looks great and the ‘ergonomic grip is just wonderful to hold and fits nicely in your hand.

Let's not forget its iconic durability; the Geekvape Aegis Boost Plus looks and feels dustproof, waterproof, and shockproof, but we'll give it a good test later in the review.

GeekVape Aegis Boost Plus Pod Mod E-Cigarette Review

Geekvape Aegis Boost Plus Cartridge

The pod is enormous, longer than it is wide.

It's easy to see the liquid level, but what I like most is the placement of the coil information. The coil information is not on the side of the coil, and even with the most thoughtfully designed coils, it can be hard to see the information.

However, the Geekvape Aegis Boost Plus coils are push-pull coils, and their information is written on the bottom. I think this is one of those small things that makes a significant difference, especially in terms of convenience.

Geekvape Aegis Boost Plus Airflow

The adjustable airflow is on the front of the device. Although it's the same as the original Boost, it's a very innovative design.

It's easy to adjust, but not so easy to change by itself.

The airflow is very flexible for a 40W kit, providing ample airflow for 40W DTL vaping and is almost airtight when fully closed.

Geekvape Aegis Boost - Display

Although the display has been upgraded, it's very typical for an Aegis Kit (except for the Aegis X Kit).

At the top is the mode (Power - VW, TC-SS, TC-TCR, VPC, Bypass).

Below that is a great-looking battery level indicator divided into 6 segments.

Then in the middle is the current setting (Temperature or Wattage). At the very bottom is the usual information: Resistance, Amperage, Volts, and puff count.

Geekvape Aegis Boost - Battery

Geekvape chose to stick with the popular 18650 sized battery instead of larger batteries, which are gaining popularity.

However, this isn't a bad thing; you have to decide on the size versus the battery for such a design.

That said, I think Geekvape made the right decision, though a larger battery wouldn't have made much difference in size, I guess it's all about the perfect size. And for a 40W kit, let's face it, do you really need a larger battery?

I don't think so.

Although the battery is external, the kit uses a Micro USB charger.

Geekvape Aegis Boost - Battery Cap

Aegis mods typically feature 2 types of battery caps: screw-on or latch.

I believe this mainly depends on whether it's a mod or a dual battery device; either way, I'm very happy to see that the Geekvape Aegis Boost Plus has a screw-on cap.

The screw-on cap is secure, waterproof, and has its own handle.

There's even a flathead screwdriver slot in case it's too tight; it can be a bit stiff, but that's due to its waterproof nature.

The threads are nice and smooth, but it can be a bit difficult to put the cap on due to the battery spring. This isn't a major hurdle, just remember to push while screwing it in.

Geekvape Aegis Boost Plus - Quick Start Guide

Filling the Pod

Lift the rubber stopper on top of the pod

Fill the pod

Reapply the stopper

When filling the pod with a new coil, allow 5 minutes for the liquid to soak into the coil before use – this is known as priming the coil.

geekvape aegis boost plus kit filling hole

Replacing the Geekvape Aegis Boost Plus Coil

Press the pod release button on the back of the system

Pull the coil out from the base of the pod

Insert the new coil and reapply it to the mod

Fill and allow 5 minutes for the liquid to soak into the coil

geekvape aegis boost plus kit coil placement

Installing a Battery in the Geekvape Aegis Boost Plus

Lift the lever on the battery cap/cover

Unscrew and remove the cap

Insert the 18650 battery positive (+) side first into the mod

Reapply the cap tightly

Geekvape Aegis Boost Plus Button Operations

Turn On/Off = Press the fire button 5 times within 2 seconds

Increase/Decrease Power = Press the ‘+’ / ‘-’ buttons

Lock/Unlock ‘+’ / ‘-’ buttons = Press ‘+’ / ‘-’ buttons simultaneously for 2 seconds – a padlock icon will appear under the power setting when locked

Stealth Mode On/Off (turn display on/off) = Hold down the fire button, ‘+’ and ‘-’ buttons simultaneously for 1 second – Stealth mode also locks the ‘+’ / ‘-’ buttons

Screen Brightness Up/Down = Press the fire button and "+" / fire button and "-"

Enter Settings = Press the fire button 3 times within 2 seconds

Exit Settings = Long press the fire button or wait 5 seconds

Geekvape Aegis Boost Plus Pod Mod - Overall Review

NEW PRODUCTS

Whatsapp Contact